Potter Signal Products - Addressable Fire Alarm System

Potter has been a privately held company and a leader in fire protection since 1898. As a privately held business, Potter is able to quickly respond and react to our customers� needs and provide the individual attention and service that each of our customers deserve. Potter�s reputation for quality and service has been the catalyst towards its focus for the design, development and manufacture of the highest quality and most reliable life safety products available today.

Below Listed are products from Potter signal that we endorse and for Potter Fire brochure please click here :

For Potter Plus Brochure Please click here :

For DCD Certification of Potter Fire Alarm Products click here :

Analog Addressable FACP Click to Expand

P-Series Analog Addressable FACPs

30 Point FACP

P100
  • 30 Addressable Points
  • 3.5A NAC Power Supply
  • 2 Class A or 2 Class B NACs
  • NAC circuit rating: 3A each
  • 99 Programming Zones
  • Email capabilities built in
  • Quadrasync for any combination of
    Potter/AMSECO�, Wheelock�, Gentex�,
    and System Sensor�

75 Point FACP

P200
  • 75 Addressable Points
  • 3.5A NAC Power Supply
  • 2 Class A or 2 Class B NACs
  • NAC circuit rating: 3A each
  • 2 On-board, programmable I/O circuits
  • I/O circuit rating: 1A each
  • 99 Programming Zones
  • Email capabilities built in
  • Quadrasync for any combination of
    Potter/AMSECO�, Wheelock�, Gentex�,
    and System Sensor�

127-381 Point FACP

P300
  • Supports a maximum of 381 Addressable Points
  • 5A NAC Power Supply
  • 2 Class A or 2 Class B NACs
  • NAC circuit rating: 3A each
  • 2 On-board, programmable I/O circuits
  • I/O circuit rating: 1A each
  • 99 Programming Zones
  • Email capabilities built in
  • Quadrasync for any combination of
    Potter/AMSECO�, Wheelock�,
    Gentex� and System Sensor�

127-2,032 Point FACP

P400
  • Supports a maxumum of 2,032 Addressable Points
  • 10A NAC Power Supply
  • 6 Class A or 6 Class B NACs
  • NAC circuit rating: 3A each
  • 4 On-board, programmable I/O circuits
  • I/O circuit rating: 1A each
  • 1500 Programming Zones
  • Email capabilities built in
  • Quadrasync for any combination of
    Potter/AMSECO�, Wheelock�, Gentex�,
    and System Sensor�
Addressable Detectors Click to Expand

Addressable Heads & Bases

Detector Base

AB-6
  • Intuitive Terminal Marking to assist with Installation
  • Will mount to Single, Double Gang, Octagon or 4� Square
  • Terminals will accept 14 to 22 AWG wire

Smoke Detector

PSA
  • Low profile, less than 2 inches with the base
  • Wide Sensitivity Range of 1.05 to 3.82%/foot
  • True Analog Sensor
  • UL listed Smoke Calibration and Sensitivity

Analog Sounder Base

ASB-6
  • Integrated Sounder in Base
  • 75 dB (UL 464 listed)
  • Sounder Independent of Sensor
  • May be mapped to any device connected to the Control Panel

Smoke / Heat Detector

PSHA
  • Photoelectric Smoke and Fixed Temperature Heat Sensor
  • Wide Sensitivity Range of 1.05 to 3.82%/foot
  • 135� Fahrenheit restorable Heat Detector
  • True Analog Sensor
  • UL listed Smoke Calibration and Sensitivity
Addressable Detectors Click to Expand

Addressable Heads & Bases

Detector Base

AB-6
  • Intuitive Terminal Marking to assist with Installation
  • Will mount to Single, Double Gang, Octagon or 4� Square
  • Terminals will accept 14 to 22 AWG wire

Smoke Detector

PSA
  • Low profile, less than 2 inches with the base
  • Wide Sensitivity Range of 1.05 to 3.82%/foot
  • True Analog Sensor
  • UL listed Smoke Calibration and Sensitivity

Analog Sounder Base

ASB-6
  • Integrated Sounder in Base
  • 75 dB (UL 464 listed)
  • Sounder Independent of Sensor
  • May be mapped to any device connected to the Control Panel

Smoke / Heat Detector

PSHA
  • Photoelectric Smoke and Fixed Temperature Heat Sensor
  • Wide Sensitivity Range of 1.05 to 3.82%/foot
  • 135� Fahrenheit restorable Heat Detector
  • True Analog Sensor
  • UL listed Smoke Calibration and Sensitivity
Addressable Modules Click to Expand

Miniature Contact Module

MCM
  • UL, cUL, and CSFM listed
  • Used to monitor devices such as Pull Stations where the device can be placed in the enclosure.
  • SLC wiring style is applicable to the NFPA Class A (Style 6, 7) & Class B (Style 4).
  • IDC wiring style is applicable to the NFPA Class B (Style B).
  • SLC loop wiring (S+, S-) and initiating device wiring (C, NO) are power limited.

Short Circuit Isolator

SCI
  • UL, cUL, and CSFM listed
  • Isolates shorts within the loop
  • Used to prevent loss of communication in SLC circuit
  • Required with Class A, Style 7 wiring

Dual Contact Module

DCM-4
  • UL, cUL, and CSFM listed.
  • Two (2) Class B and one (1) Class A input module.
  • SLC wiring style is applicable to the NFPA Class A (Style 6, 7) & Class B (Style 4).
  • IDC wiring style is applicable to the NFPA Class B (Style B) & Class A (Style D).
  • SLC loop wiring (S+, S-) and initiating device wiring (C1, NO1, C2, NO2) are power limited.

Single Contact Module

SCM-4
  • UL, cUL, and CSFM listed
  • For connection with Dry Contact devices (i.e, pull station, waterflow switch, etc)
  • SLC wiring style is applicable to the NFPA Class A (Style 6, 7) & Class B (Style 4).
  • IDC wiring style is applicable to the NFPA Class B (Style B).

Twin Relay Module

TRM-4
  • UL, cUL, and CSFM listed
  • Two (2) Form C contacts
  • Contacts rated at 2A at 24 VDC / 0.5A at 125 VAC
  • Controlled by compatible panel
  • Mounts in 4� or double gang box

Conventional Initiating Zone Module

CIZM-4
  • UL, cUL, and CSFM listed
  • SLC wiring style is applicable to the NFPA Class A (Style 6, 7) & Class B (Style 4).
  • IDC wiring style is applicable to the NFPA Class B (Style B) & Class A (Style D).
  • Power supply for terminals 24+ and 24- must be power limited

Monitored Output Module

MOM-4
  • UL, cUL, and CSFM listed
  • 24 VDC Monitored Output Control
  • 5.1k ohm EOL
  • NAC or Releasing Control
  • LED indicates activation of module
  • All terminals are power limited
  • Listed with Potter/Amseco�, Gentex�, & Cooper Wheelock� sync modules and devices
Notification Devices Click to Expand

Remote Mini-Horn

MH and HP-25 Series
  • Terminal/4-wire models
  • Sound output 97dB
  • Single gang plate
  • 15 mA current draw
  • Temporal and non-temporal patterns(HP-25)
  • HP-25 12/24 VDC
  • MH-12/24 VDC
  • MH-120 VAC
  • Listings: UL, ULC, and CSFM

Select-A-Horn

H-1224
  • 33 sound output settings
  • Horn or chime sound output
  • Indoor/outdoor listed (with weatherproof back box)
  • Pre-wire back plate
  • Universal back plate mounting
  • Listings: UL, cUL and CSFM

Bells

PBA & MBA
  • Red powder coating finish
  • Sizes available: 6�, 8�, 10�
  • Available voltage: 24 VAC, 120 VAC, 12 VDC, 24 VDC
  • Service use: fire alarm, general signal, burglar alarm
  • Environment: -40� to 150�F, Indoor or outdoor use (outdoor use requires weatherproof backbox BBK-1)
  • Five year warranty
  • Listings: UL, ULC (DC only), CSFM, and MEA

Remote Mini-Horn

HPS-24 Series
  • Polarized with wide operating voltage range using filtered DC or unfiltered FWR input voltage
  • 4 wires for easy field wiring
  • Mounts to single gang back box
  • Silencer button for 10 minute silence
  • Available in red or white
  • Optional supervised and non-supervised isolators
  • Listing: cUL

Silence Module

SM-1 Series
  • Low current
  • Local signal silence device
  • Dwelling use only
  • AC or DC devices
  • LED indication
  • Listing: cUL

Non-Supervised Isolator

IS-N Series
  • Isolates short circuits
  • Dwelling use only
  • Mounts to standard electrical box
  • Available in red or white
  • Listing: cUL

Supervised Isolator

IS-S Series
  • Isolates short circuits
  • Dwelling use only
  • Mounts to standard electrical box
  • Available in red or white
  • Listing: cUL

Select-A-Chime

CM24C and SCM24C
  • 30, 75, 110, or 177 candela
  • Selectable chime sound
  • High or low volume
  • 2400 Hz or 2700 Hz
  • Temporal or continuous chime
  • Sleeping Room Notification Compliant
  • Private mode only
  • Ceiling or Wall mount
  • Listing: UL

Select-A-Strobe

SL24C
  • Selectable 30, 75, or 110 candela
  • Low current draw
  • Terminal for easy wiring
  • Tamper proof Select-A-Switch
  • Available 177 candela model
  • Designed for wall and ceiling mount
  • Sleeping Room Notification Compliant
  • Surface mount skirt RBX-1
  • Universal adapter plate SPC-1
  • Listings: UL, ULC, CSFM, MEA, ADA

Select-A-Strobe/Horn

SH24C
  • Selectable 30, 75, or 110 candela
  • 177 candela model also available
  • Low current draw
  • 24 VDC input
  • Terminal for easy wiring
  • Tamper proof Select-A-Switch
  • Designed for wall and ceiling mount
  • Surface mount skirt RBX-1
  • Universal adapter plate SPC-1
  • s
  • Listings: UL, ULC, CSFM, MEA, ADA

Select-A-Strobe/Horn

SH-1224
  • 12 VDC with 15, 35 or 60 cd setting
  • 24 VDC with 15, 35, 60, 75, 95 or 110 cd setting
  • 6 candela settings per device
  • 33 sound output settings including chime
  • 15/75 ADA compliant on 60 cd setting
  • Candela selection view window
  • Pre-wire back plate
  • Universal back plate mounting
  • Listings: UL, cUL, ADA and CSFM

Weatherproof Select-A-Strobe/Horn

SH-1224WP
  • 12/24 VDC versions
  • Low current draw
  • Other lens colors available
  • 6 candela settings>
  • Includes a BBX-5 backbox
  • Listings: UL, cUL, ADA and CSFM

High Intensity Select-A-Strobe/Horn

SH-24H
  • 24 VDC
  • 6 candela settings: 95, 110, 135, 150, 177, 185
  • Candela selection view window
  • Low current draw
  • Listings: UL, cUL, ADA and CSFM

Weatherproof Select-A-Strobe/Horn

SH-120 SERIES
  • 120 VAC operation
  • Low current draw
  • 6 sound output settings
  • Indoor/outdoor
  • Includes BBX-5 backbox

Weatherproof High Intensity Select-A-Strobe/Horn

SH-24H-WP
  • 24 VDC
  • 6 candela settings: 95, 110, 135, 150, 177, 185
  • Indoor or outdoor
  • Includes a BBX-5 backbox
  • Listings: UL, cUL, ADA and CSFM

Weatherproof High Intensity Select-A-Strobe/Horn

SH-24H-WP
  • 24 VDC
  • 6 candela settings: 95, 110, 135, 150, 177, 185
  • Indoor or outdoor
  • Includes a BBX-5 backbox
  • Listings: UL, cUL, ADA and CSFM

Select-A-Strobe

SL-1224
  • 12 VDC with 15, 35 or 60 cd setting
  • 24 VDC with 15, 35, 60, 75, 95 or 110 cd setting
  • 6 candela settings per device
  • 15/75 ADA compliant on 60 cd setting
  • Candela selection view window
  • Pre-wire back plate
  • Universal back plate mounting
  • Listings: UL, cUL, ADA and CSFM

Weatherproof Select-A-Strobe

SL-1224WP
  • 12/24 VDC versions
  • Other lens colors available
  • 6 candela settings
  • Includes BBX-5 backbox
  • Listings: UL, cUL, ADA and CSFM

High Intensity Select-A-Strobe�

SL-24H
  • 24 VDC
  • 6 candela settings: 95, 110, 135, 150, 177, 185
  • Candela selection view window
  • Low current draw
  • Listings: UL, cUL, ADA and CSFM

Weatherproof Select-A-Strobe

SL-120 SERIES
  • 120 VAC operation
  • Low current draw
  • Indoor/outdoor
  • Includes BBX-5 backbox
  • Listings: UL and CSFM

Weatherproof High Intensity Select-A-Strobe

SL-24H-WP
  • 24 VDC
  • 6 candela settings: 95, 110, 135, 150, 177, 185
  • Indoor or outdoor
  • Includes a BBX-5 backbox
  • Listings: UL, cUL, ADA and CSFM
Fire Pull Stations Click to Expand

Fire Pull Stations

P32-1T Series
  • Single or dual contact
  • Terminal connections
  • Standard single gang mounting
  • 10 Amp snap action switch
  • Gold plated SPST contacts
  • Optional auxiliary relay contacts
  • High gloss red enamel finish
  • Glass breakrod
  • Surface back boxes available
  • Listings: UL, ULC, ADA, CSFM and FM

Weatherproof Pull Station

RMS-1T-WP
  • Single or dual action
  • Optional key reset
  • Key operated available
  • Dual action available
  • Standard single gang mounting
  • 10 Amp snap action switch
  • Gold plated SPST contacts
  • Optional auxiliary relay contacts
  • High gloss red enamel finish
  • Glass breakrod
  • Single or double contact
  • Listings: UL, ULC, ADA, CSFM and FM

Fire Pull Station

P32-1T-LP
  • Dual Action Pull Station
  • Single contact
  • Standard single gang mounting
  • 10 Amp snap action switch
  • Gold plated SPST contacts
  • Optional auxiliary relay contacts
  • High gloss red enamel finish
  • Glass breakrod
  • Surface and weatherproof back boxes available
  • Listings: UL, ULC, ADA, CSFM and FM

Pull Station

Special Applications

The pull stations are available in red, blue, green, yellow, white, black, gray, purple or orange. The wording on the pull stations is customizable with a large variety of standardized units. The standard models have a hex key reset, however a key reset is also available. An institutional model is available that is operated with a key only. The models are available with shallow and deep surface mount back boxes.

  • Colors available: Black, blue, green, grey, orange, purple, red, white or yellow
  • Single or dual action
  • Terminal connectors
  • Glass breakrod
  • 10 Amp snap action switch
  • Mounts on standard single gang box
  • Surface back boxes available
  • Single or double contact
  • Gold plated SPST contacts
  • Weatherproof and explosion proof
  • Brass or chrome plating
  • Custom labeling in any language
  • Made in the U.S.A.
  • Listings: UL, ULC, ADA, CSFM, FM and MEA