• Comfort • Safe • Secure

FIREFIGHTERS SMOKE CONTROL STATION (UUKL)

  1. Home
  2. Fire Control Panel
  3. FIREFIGHTERS SMOKE CONTROL STATION (UUKL)
firefighters-smoke-control-station-uukl

FIREFIGHTERS SMOKE CONTROL STATION (UUKL)

FEATURES

  • Enclosures are constructed of cold rolled steel with fully welded and grounded seams and painted with a black powder textured coat for a truly finished appearance.
  • A variety of display materials are available. Standard is UL94VO flame retardant grade lexan, laminated to CNC punched aluminum. Anodized aluminum and stainless steel displays are also available. A dry erase coating can be applied to the display face, when required.
  • Full color graphics at no additional charge.
  • The best delivery of finished product in the business…guaranteed!
  • Can be wired directly to fire alarm lamp driver modules or hardwired to terminals.
  • UUKL and CSFM listed.
  • The following Kirkland panels are qualified by the ICC Evaluation Service to ACC156 seismic criteria: RSE-GR-GP4, RSE-L-GR-GP4, RSF-GR-GP4, RSF-L-GR-GP4, RSG-GR-GP4, RSG-L-GR-GP4. OSHPD seismic certification number is OSP-0139-10

    SPECS

    Material

    Boxes: #16 Gauge Steel with a Black Textured Finish (Standard).
    Door: #16 Gauge Steel with a Black Textured Finish (Standard), or #16 Gauge Stainless Steel with a #4 Horizontal Brush upon request.
    Hinge: Concealed Stainless Steel located on the left side.
    Fastener: #2171 Key change lock.

    Backbox Depth

    Semi-Flush: 3.50″
    Surface: 4.75″

    The FSCS panel shall be UUKL listed and conform to NFPA-92A guidelines.

    The enclosure shall be constructed of cold rolled steel with welded and ground seams and finished with a black powder textured finish. The annunciator door shall have a concealed stainless steel piano hinge and the door shall be finished with a black powder textured finish or brushed stainless steel as directed by the engineer. The door shall be fastened with a key lock with no other fasteners visible. The graphic display shall consist of a lamination of an aluminum substrate with a reverse printed polycarbonate overlay. The graphic must have full color capacity to show different colors for supply, exhaust, and pressurization. A velvet texture finish must be applied to the polycarbonate face to eliminate glare. LEDs shall protrude through the laminate for 180 degrees visibility. They shall be wired to designated terminals for interface with customer’s remote controllers. AHU Switches must be UL recognized components with a minimum rating of 24 VDC/AC, 1amp. They shall be wired to designated terminals for interface with customer’s remote controllers. The panel must include a Key Enable Switch and a Lamptest Switch.

Category:

Product description

The Firefighters Smoke Control (FSCS) panel allows a fireman to control the flow of air in a building, in a fire situation. The Smoke Control panel can have switches for the various fans and dampers within a building. It is most commonly used in high-rise buildings. Accompanying the switches, there are normally status LEDs, which show the position of the damper or fan switch. The Smoke Control display is most often seen depicted as a riser, showing the building levels and stairwells. The design of the FSCS is normally driven by code and/or the AHJ.

Kirkland specializes in Fire Alarm Graphic Design, having an exceptional drafting department, and Graphic Display methods, that allow for a clear, concise illustration of the layout, including using full-color graphics. Using full-color graphics assists the fireman in identifying the flow of air, showing the exhaust flow line in red, and pressurization/supply in green. There is no additional charge for colors utilized in the display, with unlimited colors to choose from.

Kirkland offers a wide range of large enclosures, which accommodate the normally large size of the FSCS panels. Our largest standard UUKL panel is 79.5”w x 40.5”h

Name
Email
Phone
Enquiry

Related products

  • Read more

    Smoke heat detector and CO DTC-6046